Adding postage or changing the date, Adding more postage, Adding postage or changing the date -34 – Pitney Bowes DM900 User Manual

Page 66

4 • Running Mail

4-34

SV60861 Rev. F

Adding

Postage or

Changing

the Date

If you do not have the correct postage or date on a piece of mail, you can

add more postage or change the date directly on a piece of mail. If you pre-

fer, you can print the corrections on at a tape instead and then apply it to

the piece of mail.

Adding More Postage

1. If you are printing more postage on an envelope and if the envelope is

sealed, press the

seal key and select Sealer Off. If you are printing on

a tape, go to step 3.

2. Turn the piece of mail around 180 degrees so that the meter stamp is in

the lower left corner as shown here. Then, place the envelope on the

feed deck with the flap facing down.

3. To add more postage, press the

Mode key and select Key In Postage.

4. Enter the additional amount using the numeric keys and press

Enter.

Press the

Start key. If you are printing a tape, press the Tape key. The

additional postage prints on the envelope as shown below.

If you print a tape, apply the tape to the envelope below the existing

meter stamp.

0030

00 30

0030

00 07

0030