Pitney Bowes DM900 - Manual (Page 170)

12 • Specifications
12-2 SV60861 Rev. F
Equipment Specifications
Dimensions .
Power and Compliance
Operating Conditions
Capacities and Features
Length without a Drop or Power Stacker 45 in. (114cm)
Length with a Drop Stacker 52 in. (131.9cm)
Length with a Power Stacker 74.5 in. (189.23cm)
91 in. (231.14cm) when stacker is fully extended
Width 22 in. (55.9cm)
Height (cover closed) 19 in. (48.3cm)
Power 100-240 VAC
Compliance UL 1950, UL listed
Temperature Range F (C) *
*Temperature will vary depending on the 
material used
Minimum: 40 (04)
Maximum: 109 (43)
BTUs per hour Approx. 1270
Printhead Life 1,000,000 cycles
Feeder Type Automatic
EZ Seal® Sealing Solution Fluid Sensing Warning message for low fluid level of EZ Seal®
Ink Capacity 45,000 pieces with no advertisements, permits, or inscrip-
tions
30,000 pieces with advertisements, permits, or inscriptions
1.5 years shelf/installed life
Ink Usage Messages
• Order Ink - This message indicates that there are
approximately 10 days of ink remaining. This message
is drop count controlled and calculated by a chip within
the print head carriage.
• Low Ink - This message indicates that there are approx-
imately 2 days of ink remaining. This message is drop
count controlled and calculated by a chip within the print
head carriage. Approximately 5 days of printing remain
before the Ink Out message appears.
• Ink Out - When this message appears, the mailing
machine stops. This function is controlled by the S2
sensor needles that protrude into the bottom of the ink
cartridge.