Pitney Bowes E702 User Manual

Page 34

E 7 0 0 / E 7 0 2 M E T E R S

Step 3: Replacing the Ink Cartridge

Before replacing the ink cartridge, perform printer mainte-
nance as described in step 1. Refreshing the printer may
clear any clogged nozzles.

Take the following precautions to avoid damage to the
print mechanism:

• Do not leave printhead without an ink cartridge in place;

if the cartridge runs out of ink and you do not have
another, leave the empty cartridge in place until you
can replace it. This will prevent the printhead from dry-
ing out.

• Always use the

function

via the

Setup

key when replacing an ink cartridge.

• Never install a partially used ink cartridge; automatic

maintenance is based on installing new cartridges.

• Do not refill used ink cartridges; these cartridges contain

United States Postal Service-approved ink that is special-
ly designed to work with your printer. Other inks will
likely cause damage to your printer and cause your mail
to be delayed in delivery or returned.

INSTALL INK CARTRIDGE?

This manual is related to the following products:

E700