Pitney Bowes E702 - Manual (Page 10)

E 7 0 0 / E 7 0 2 M E T E R S
Printing Postage
Step 1: Checking the Date
To temporarily advance the date
To reset to the meter date
Since you must mail your envelope on the day that is
printed in the meter stamp, be sure to check the date
on the display before you print the postage.
If you plan to mail the envelope after the postal carri-
er has picked up the mail, set the date for the next day
using the advance date function.
Press the Advance Dat e key. The current
date displays.
Press the Advance Date key again to
advance the date.
Press Enter to set the date and return to
ready mode.
Always restore the current date when finished. If you
do not, the date will remain inaccurate.
Press the Advance Date key.
Press the Clear ( C ) key. The meter date is
displayed.
Press the Enter key.
To change the meter date, use the Change Date
function under Setup Options.
!
10