Voltage readings – Mighty Mule FM350 User Manual
Page 39
35
rev 07.16.12
VOLTAGE READINGS
18 Vac Transformer _________________________18.0 to 22.0 Vac
5 W Solar panel (single) _____________________18.0 to 22.0 Vdc
measure voltage at panel and control box.
12 V Battery ________________________________12.0 to 13.5 Vdc
Charging circuit ____________________________12.0 to 14.8 Vdc
measure voltage with battery connected
LEARN LIMIT Mode:
This LED will turn on when the ‘LEARN-LIMIT’ button is pressed. It will turn off after 3 seconds
indicating that it has entered the learn limit mode (if not at the retracted limit) or cleared the previous
learned limit (if at retracted limit). See "Setting Closed Position" section on page 26.
Whenever there is a change in state at any of the inputs this LED will blink once.
3. POWER LED (Green):
ON: AC power or solar power is presented.
OFF: NO AC power or solar power is presented.
4. CHARGING LED (Red):
Red light on or flashing – the unit is charging
Red light off – the unit is not charging. Check transformer or solar panel.
THE GATE CLOSES THEN OPENS PARTIALLY:
1. Check the position of the mounting brackets and readjust if necessary.
2. Check the gate for binding or hinge damage.
3. Increase
Stall Force setting.
THE GATE OPENS THEN CLOSES PARTIALLY:
1. Check the position of the mounting brackets and readjust if necessary.
2. Check the gate for binding or hinge damage.
3. Increase
Stall Force setting.