beautypg.com

Important safety instructions, Manually opening and closing gate – Mighty Mule FM200 User Manual

Page 5

background image

iii

rev 07.25.12

Clevis

Pin

Hairpin Clip

Gate Bracket

Front Mount

Because automatic gate openers produce high levels of

force, consumers need to know the potential hazards

associated with improperly designed, installed, and

maintained automated gate opener systems. Keep in

mind that the gate opener is just one component of

the total gate operating system.

Each component must

work in unison to provide the consumer with convenience,

security, and safety.

This manual contains various safety precautions and

warnings for the consumer. Because there are many

possible applications of the gate opener, the safety

precautions and warnings contained in this manual cannot

Disconnecting the Opener


1. Turn control box power switch OFF.
2. Remove hairpin clip, clevis pin, and bushing from both

the front or rear mounting points.

3. Remove the opener from the mounts.

The gate can be opened and closed manually
when the opener is disconnected.

be completely exhaustive in nature. They do, however,

provide an overview of the safe design, installation,

and use of this product. CAREFULLY READ

AND FOLLOW ALL SAFETY PRECAUTIONS,

WARNINGS, AND INSTALLATION

INSTRUCTIONS TO ENSURE THE SAFE

SYSTEM DESIGN, INSTALLATION, AND USE

OF THIS PRODUCT.

Precautions and warnings in this manual are

identified with this warning symbol. The symbol

identifies conditions that can result in damage to the

opener or its components, serious injury, or death.

Manually Opening and Closing Gate

Because GTO automatic gate openers are only part of the total gate operating system, it is the

responsibility of the consumer to ensure that the total system is safe for its intended use.

CAUTION: The gate will move freely and uncontrolled when the gate opener is removed from

the gate. ONLY disconnect the opener when the control box power switch is OFF and the gate is

NOT moving.

NOTE: Substitute a Pin Lock (FM133) for the clevis pin on the front mount

of the gate opener to prevent unauthorized removal of the opener from the gate

(see accessory catalog).

IMPORTANT SAFETY INSTRUCTIONS