Martin Christ Alpha 2-4 LSCplus - Manual (Page 78)

ALPHA 1-4 LSC&
ALPHA 2-4 LSC&
8 Maintenance and service
78
Version 01/2011, Rev. 1.5 of 16/12/2013 • sb
Translation of the original operating manual
Pos: 186 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 80 Wa rtun g u nd In stan dhalt ung/ 080 Wa rtun g un d Ins tan dhalt ung == === == == === == == === == == == == @ 6\m od_ 129 913 772 5871 _68 .docx @ 3 520 1 @ 1 @ 1
8 Maintenance and service
The freeze-dryer and the accessories are subject to high mechanical
stress. Thorough maintenance performed by the user extends the service
life and prevents premature failure.
CAUTION
If corrosion or other damage occurs due to improper care, the
manufacturer cannot be held liable or subject to any warranty claims.
• Use soap water or other water-soluble, mild cleaning agents for
cleaning the freeze-dryer and the accessories.
• Do not use corrosive and aggressive substances.
• Do not use solvents.
• Do not use agents with abrasive particles.
• Do not expose the freeze-dryer or its accessories to intensive UV
radiation (e.g. sunlight) or thermal stress (e.g. by heat generators).
• Do not turn the unit upside down in order to clean it.
Pos: 187 /01 0 Univ ersal mod ule/ Lee rzeile @ 0\ mo d_12 021 162 445 00_ 0.doc x @ 1 14 @ @ 1
Pos: 188 /01 0 Univ ersal mod ule/ Lee rzeile @ 0\ mo d_12 021 162 445 00_ 0.doc x @ 1 14 @ @ 1
Pos: 189 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 80 Wa rtun g u nd In stan dhalt ung/ 080 -00 10 Wart ungs arb eiten -- --- -- --- --- -- --- -- --- -- --- --- -- --- -- --- --- -- --- -- --- -- --- --- -- --- -- --- - @ 6\m od_1 299 137 726 199 _68. docx @ 35 209 @ 2 @ 1
8.1 Maintenance
Pos: 190 /01 0 Univ ersal mod ule/ Lee rzeile @ 0\ mo d_12 021 162 445 00_ 0.doc x @ 1 14 @ @ 1
Pos: 191 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 80 Wa rtun g u nd In stan dhalt ung/ 080 -00 10- 001 0 G efri ertr ockn ungs anla ge @ 6\m od_ 129 9137 726 512 _68 .docx @ 35 217 @ 3 @ 1
8.1.1 Freeze-dryer
• Switch the freeze-dryer off by actuating the mains power switch and
disconnect the power cord from the wall outlet before cleaning.
• Remove product residues thoroughly with a cloth.
• If the freeze-dryer has been contaminated with toxic, radioactive, or
pathogenic substances, clean the inside immediately with a suitable
decontamination agent (depending on the type of contamination, see
chapter 8.2 - "Disinfection of the drying chamber and accessories").
WARNING
Take suitable precautions for your own safety if there is a risk of toxic,
radioactive, or pathogenic contamination.
• Open the lid/drying chamber when the freeze-dryer is not in use so
moisture can evaporate.
Pos: 192 /01 0 Univ ersal mod ule/ Sei tenwe chsel @ 0\ mod _12 021 1624 431 2_0 .docx @ 1 05 @ @ 1