Martin Christ Alpha 2-4 LSCplus - Manual (Page 46)

ALPHA 1-4 LSC&
ALPHA 2-4 LSC&
6 Operation
46
Version 01/2011, Rev. 1.5 of 16/12/2013 • sb
Translation of the original operating manual
Change scale unit (2)
This dialog box is used to change the unit of measurement for the
temperature and vacuum.
Fig. 32: Dialog box "Change scale unit"
Freeze-drying process (3)
NOTE
This function depends on the unit type and is not available for all types of
freeze-dryers.
Prior to the start of the process, the correct process must be selected. The
following processes are available:
•
Single-chamber method (process A): drying inside the ice condenser
chamber
• Double-chamber method (process B): drying outside the ice
condenser chamber
• Double chamber method (Process B) – LyoCube: drying outside the ice
condenser chamber, but with the CHRIST LyoCube ® (a rectangular
drying chamber that can be loaded from the front)
Fig. 33: Dialog box "Freeze-drying processes"