Luxul XWR-600 - Manual (Page 36)

36
XWR-600
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XWR-600 Vers: 07814
3.6.3 UPnP
This page displays the UPnP Settings currently configured on the Router.
Select the menu Firewall/Security>>UPnP to display the following page:
„
UPnP Configuration: Displays the UPnP (Universal Plug and Play) configuration.
w
UPnP: Allows you to Enable or Disable UPnP on the Router. Enabled is the default.
„
Available Networks: Displays which Networks on the Router have UPnP Enabled.
w
Local Network/LAN: Allows you to enable UPnP for the configured
Local Network.
w
Guest Network: Allows you to enable UPnP for the configured Guest Network.
w
Save: This button is used to Save the configuration changes made on this page.
Once you have clicked Save, you may move to other pages in the Router setup.
Most changes will require a Reboot to allow the changes to take effect.
w
Reboot: This button is used to Reboot the Router after making configuration
changes or can be used to Reboot the Router for any reason.
w
Cancel: This button Cancels any changes made on this page.
„
Current UPnP Leases: Displays the active UPnP (Universal Plug and Play) Port Leases.
w
WAN Port: Displays the WAN Port opened by the UPnP Device Lease.
w
LAN IP: Displays the Local Network IP Address of the UPnP Device that
requested the Lease.
w
LAN Port: Displays the LAN Port used by the UPnP Device.
w
Protocol: Displays the Protocol (TCP/UDP/Both) set by the UPnP Device.