User guide – Luxul XWR-600 User Manual

Page 13

User Guide

Other trademarks and registered trademarks are the property of their respective owners

Custom MTU: Allows you to configure a Custom MTU setting. MTU (or Maximum
Transmission Unit), is the maximum packet size allowed on the network. Some ISPs
(usually DSL or Fiber) will require this value to be set if the Modem is in
Bridge mode.

After making any changes to the Connection Type, you must click the Save button
to Save your changes, then you must click the Reboot button for the changes to take
effect. You can click the Save button and proceed to other pages without losing your
configured changes.

3.1.4 Local Network / LAN
Allows you to set the Local Network IP Address of the Router and the Subnet Mask
used in the Local Network.

Select the Menu

Quick Setup to view the following page:

Local Network / LAN: Displays the Local Network IP Options

LAN IP Address: Allows you to configure the LAN IP of the Router, this will be used
by all devices in the LAN as the Default Gateway. If you are installing other Luxul
devices, we recommend keeping the default IP of 192.168.0.1.

LAN Subnet Mask: Allows you to specify the Subnet Mask to be used in the LAN.
The default value of 255.255.255.0 is recommended unless specified otherwise by
your Network Administrator.