Luxul XWR-600 - Manual (Page 12)

12
XWR-600
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XWR-600 Vers: 07814
Select the Menu Quick Setup and Connection Type Static IP from the dropdown to
view the following page:
„
Internet/WAN: Displays the WAN connection Options
w
Connection Type: Select the desired WAN Connection Type. When set to
Static IP, you must enter the IP information that the ISP provides allowing the
Router to connect.
w
Static IP: Allows you to enter the WAN connection IP Address specified
by the ISP.
w
Netmask: Allows you to enter the WAN connection Subnet Mask specified
by the ISP.
w
Gateway: Allows you to enter the WAN connection Gateway IP Address specified
by your ISP.
w
Primary DNS: Allows you to manually configure the Primary DNS Server IP Address
specified by the ISP or any third party DNS Server IP Address. With the Static IP
Connection Type specified, this is a required field.
w
Secondary DNS: Allows you to manually configure the Primary DNS Server IP
Address specified by the ISP or any third party DNS Server IP Address. With the
Static IP Connection Type specified this is a required field.
w
Custom MAC Address: Allows you to set a Custom MAC Address which allows
the Router to appear as a Computer to the ISP Modem. Some Modems will cache
the MAC Address of the first device used to setup Internet Service and cannot be
reset by the user. If this occurs you can clone that setup Device’s MAC Address to
allow the XWR-600 to connect to the Modem.