Xwr-600 – Luxul XWR-600 User Manual
Page 18
18
XWR-600
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XWR-600 Vers: 07814
w
IP Address: Displays the WAN IP Address assigned to the Router.
w
Subnet Mask: Displays the WAN Subnet Mask assigned to the Router.
w
Gateway: Displays the WAN Gateway IP Address assigned to the Router.
w
DNS Server: Displays the Primary DNS Server IP Address assigned to the Router.
w
Alternate DNS: Displays the Secondary DNS Server IP Address assigned
to the Router.
w
MAC Address: Displays the current WAN Port MAC Address assigned to the Router.
Local Network / LAN Settings: Displays the current LAN Settings of the Router.
w
IP Address: Displays the LAN IP Address of the Router. This address will be the
Default Gateway for all client devices in the Local Network.
w
Subnet Mask: Displays the LAN Subnet Mask of the Router. This Mask will be the
Subnet Mask for all client devices in the Local Network.
w
MAC Address: Displays the LAN MAC Address assigned to the Router.
NOTE: If DHCP or PPPOE is the configured Connection Type and the IP
Address, Subnet Mask, Gateway, DNS Server and/or Alternate DNS
information is blank, no information was received from the ISP’s
Modem. Please check configuration and if any changes were made
please verify they were Saved and the Router was Rebooted.
NOTE: If a Custom MAC Address was specified it will be displayed as the
Internet / WAN Settings MAC Address.
NOTE: If you notice a missing Alternate DNS IP Address, we recommend
going to Quick Setup then select the Secondary DNS checkbox and
manually adding a Secondary DNS Server. You must Save and Reboot
for the changes to take effect.
3.2.2 Connected Clients
This Page displays the Client Devices that have requested a DHCP Address from
the XWR-600.
Select the menu
Status>>Connected Clients to display the following page: