Lingenfelter L250070709 Lingenfelter CTS-V LSA Supercharger Pulley 2009-2012 v1.9 - Manual (Page 8)

Page 7.
18. Using a 1/2” breaker bar, release the
tension in the supercharger belt tensioner
located on the passenger side by turning the
tensioner counter-clockwise. Grab the belt in
an open location and remove from the pulleys
CAUTION: Pinch Hazard! Do not place fingers
in between belt and pulleys.
17. Using a fork type pry tool, pry the plastic
push pin out at the location shown by the white
arrow. Then using a 10 mm socket, remove
four (4) bolts on the front fuel line protective
cover located on the front of the intercooler
shown by the yellow arrows.
NOTE: some early models did not have this
feature.
19. Disconnect the throttle actuator electrical
connector from the throttle body.
20. Using a 10 mm socket, remove the four
(4) bolts that secure the throttle body to the
supercharger assembly.