Lingenfelter L250070709 Lingenfelter CTS-V LSA Supercharger Pulley 2009-2012 v1.9 - Manual (Page 22)

Page 21.
71. Using a breaker bar, release the tension
on the tensioner by turning it counter-clockwise.
While the tension is released install the LPE
supplied belt (part # 8PK1655). See Table 1
on page 29 for recommended belt and idler
sizes for the different supercharger pulley and
damper diameter combinations.
CAUTION: Pinch Hazard! Do not place fingers
in between belt and pulleys.
72. Replace the intercooler cover. Using a 10
mm socket torque each bolt down on the first
pass to 44 lb in (5 Nm) then on a final pass of
89 lb in (10 Nm). Make certain to use the order
shown below.
NOTE: Use caution when removing and
installing cover and supercharger bolts. They
have plastic Isolators in the bolt holes that can
fall out. Isolators must be re-used.
73. (ORDER OF TORQUE)
Supercharger belt layout
CRANK
LOWER
IDLER
UPPER
IDLER
SUPERCHARGER
TENSIONER