Lingenfelter L250070709 Lingenfelter CTS-V LSA Supercharger Pulley 2009-2012 v1.9 - Manual (Page 12)

Page 11.
35. Using an 10 mm socket, start with the
back six (6) bolts and remove the sixteen (16)
bolts from the supercharger cover. Refer to the
bolt locations below.
NOTE: Use caution when removing and
installing cover and supercharger bolts. They
have plastic Isolators in the bolt holes that can
fall out. Isolators must be re-used.
33. Remove the vacuum line and PCV line as
indicated on the left.
34. Remove the bypass actuator by tilting it
upward and removing the metal bar from the
bypass shaft linkage.
(BOLT LOCATIONS)