Lingenfelter L250070709 Lingenfelter CTS-V LSA Supercharger Pulley 2009-2012 v1.9 - Manual (Page 14)

Page 13.
41. Carefully lift up on the front of the
supercharger and place a wooden block or
equivalent underneath to wedge the front of the
supercharger up 1” to 2”. Make certain your
wedging device is clean and clear of debris
40. Using an 8 mm socket, remove the ten
(10) bolts from the supercharger. Refer to the
bolt locations below.
NOTE: Use caution when removing and
installing cover and supercharger bolts. They
have plastic Isolators in the bolt holes that can
fall out. Isolators must be re-used.
42. Using a 10 mm socket, remove the (6)
bolts on the front supercharger cover.
(BOLT LOCATIONS)