Lingenfelter L250070709 Lingenfelter CTS-V LSA Supercharger Pulley 2009-2012 v1.9 User Manual
Page 29
Page
98. You can purchase vehicle programming
hardware and software from LPE, you can send
in your ECM for us to calibrate or you can have
a local tuning shop calibrate your vehicle.
NOTE - some pulley combinations require
ignition timing changes in order to operate with
pump gas. The increased boost levels risk
damaging your engine if the correct calibration
changes are not made.
28.
99. DLC port cover kit installation.
100. Install the supplied diagnostic port (DLC
port) cover onto the DLC port in the driver foot
well. Secure the strap that retains the DLC
cover to the vehicle.
This cover is meant to notify dealerships
and other service facilities that this vehicle
has custom programming installed for new
supercharger pulley ratio and it should not be
programmed with the stock GM calibration
files when being serviced.
101. Start your vehicle and listen for any
leaks. If there are any problems check all the
sensors and vacuum lines for proper hook up
and position.