Labconco Protector Controlled Atmosphere Glove Boxes 5080102 - Manual (Page 48)

ACCESSORIES
49
Accessory
Part#
Description
5061600 Interior Storage Shelves
Three epoxy coated stainless steel storage shelves are attached to
stainless steel upright supports. Shelves are adjustable height,
measuring 6" D x 30" W x 21-1/2" H. Components may be passed
through the transfer chamber and assembled within the Glove Box
enclosure. Installation by customer.
5062000 Glove Box Mobile Stand
Welded steel construction, epoxy coated with black phenolic
laminate top surface. 1/1/8" thick x 30" D x 60" W, height adjustable
from 30 to 37 inches. Lower storage shelf provides convenient space
for vacuum pump and optional drying train. Accessory includes 5"
swivel casters with locking brakes.
5062001 Glove Box Stand
Same as above except furnished with adjustable leveling feet instead
of casters.
5060400 Interior Glove Port Cover
12 gauge stainless steel with molded rubber self-centering gasket and
spring-loaded latches with adjustable closure knob. Use for internal
sealing of glove port in event of worn or damaged gloves.
5060500 Exterior Glove Port Cover
12 gauge stainless steel with molded neoprene self-centering gasket.
Adjustable tension knob with latching bar attaches to port mounting
ring screw adaptors. Use to reduce leakage due to permeation of
gloves when glove box is not in use, but interior atmosphere is
maintained.
5061300 Drying Train
Enables you to reduce humidity within the Glove Box to
approximately 5 PPM. Uses a stainless steel column filled with
molecular sieve with recirculation provided by a leak tight diaphragm
pump. Consult factory for more details.
1467700 Vacuum Pump (190 Liters/Minute)
115 VAC, 60 Hz, 6.3 Amps. 113 liters per minute pumping capacity
with gas ballast. Blank off pressure of 0.2 microns.
1472100 Vacuum Pump (113 Liters/Minute)
115VAC, 60 Hz, 6.3 Amps. 113 liters per minute pumping capacity
with gas ballast. Blank off pressure of 0.2 microns.
5060600 Vacuum Connection Kit
For connecting Glove Box exhaust in parallel with transfer chamber