Replacement parts – Labconco Protector Controlled Atmosphere Glove Boxes 5080102 User Manual
Page 47
REPLACEMENT PARTS
48
Outer Door Assembly
No. 5068401 (Used on 5060000, 5070000, 5080000 with fiberglass liners) or No. 5098600
(Used on 5060100, 5070100, 5080100 with stainless steel liners).
Ref.
No.
Catalog No.
Catalog No.
Description
Acrylic 5068401
Stainless Steel 5098600
Note: Acrylic and stainless steel doors are not interchangeable
1
5102900
5097500
Outer Door Assembly
2
5064500
Door Fitting
3
1645701
Door O-Ring
4
1927000
Nut, Stainless Steel _-16
5
5064600
5064600
Door Adjusting Screw
6
5068600
5068600
Door Clamp
7
5085301
5085301
Outside Latch Bar Assembly
8
5074501
5074501
Outside Counterweight
Figure 33
This manual is related to the following products:
- Protector Controlled Atmosphere Glove Boxes 5070102 Protector Controlled Atmosphere Glove Boxes 5060102 Protector Controlled Atmosphere Glove Boxes 5080100 Protector Controlled Atmosphere Glove Boxes 5070100 Protector Controlled Atmosphere Glove Boxes 5060100 Protector Controlled Atmosphere Glove Boxes 5080002 Protector Controlled Atmosphere Glove Boxes 5070002 Protector Controlled Atmosphere Glove Boxes 5060002 Protector Controlled Atmosphere Glove Boxes 5080000 Protector Controlled Atmosphere Glove Boxes 5070000 Protector Controlled Atmosphere Glove Boxes 5060000