beautypg.com

Labconco XVS Ventilation Stations 4865060 User Manual

Page 30

background image

Chapter 5: Using your XPert or XVS Enclosure

Product Service 1-800-522-7658

26


Work Techniques

• Keep all materials inside the lower air foil, and perform all

contaminated operations as far to the rear of the work area as possible.

• Segregate all clean and contaminated materials in the work area.

• Avoid using techniques or procedures that disrupt the airflow patterns

of the enclosure.


Final Purging

• Upon completion of work, the enclosure should be allowed to operate

for two to three minutes undisturbed, to purge airborne contaminants
from the work area before shutting down the blower.


Unloading Materials and Equipment

• Objects in contact with contaminated material should be surface

decontaminated before removal from the enclosure.

• All open trays, weigh vessels or containers should be covered before

being removed from the enclosure.


Shutdown

• Turn off the exhaust system and accessory light if provided.









This manual is related to the following products: