beautypg.com

Labconco XVS Ventilation Stations 4865060 User Manual

Page 27

background image

Chapter 4: Performance Features and Safety Precautions

Product Service 1-800-522-7658

23


10. Electrical Pass through Iris allows electrical cords and data cords to

pass through the back of enclosure without leaving a large hole for
contaminants to escape. The unit ships with solid plugs and the iris
plugs are included with the instruction manual for your convenience.

11. Shipped fully assembled to eliminate the need for costly onsite

assembly. Accessories such as the exhaust transition connections,
work surfaces, airflow monitors and fluorescent light kits are easily
installed.

12. Accessory Exhaust Connections. The XPert/XVS enclosures

feature two exhaust locations: One is located on the top of the rear
plenum and the other is located on the bottom of the rear plenum.
Exhaust transition connectors are available for either a 6" OD outside
exhaust or a 5" ID hose; 5', 6' and 8' enclosures have multiple exhaust
connections. All exhaust transition connectors are reviewed in
Chapters 2 and 3 and accessories displayed for order in Chapter 7.

13. Accessory Guardian™ Airflow Monitors continuously monitor

airflow. An audio/visual alarm alerts the user to low airflow
conditions. The Guardian™ Digital Airflow Monitor also displays a
face velocity value, provides an RS232 output, a night setback mode
and several auxiliary relay ports. See Chapter 7 for ordering
information. See Chapter 6 for detailed information, installation, and
calibration.

14. Accessory Fluorescent Light Kits provide excellent illumination

with an auxiliary outlet plug for supplying power to auxiliary
equipment such as a balance or printer. See Chapter 7 for ordering
information.

15. Accessory Roof-Mounted Blower sized to provide adequate airflow

to XPert/XVS enclosures when used with an exhaust damper. See
Chapters 2, 3 and 7.

16. Accessory FilterMate Portable Exhauster provides up to 280 cfm

for HEPA filtration or up to 220 cfm for combination HEPA/Carbon
filtration when connected to XPert/XVS enclosures. Multiple
FilterMates must be balanced and can be used on 5', 6' and 8' units
with multiple exhaust connections. See Chapters 2, 3 and 7.

This manual is related to the following products: