beautypg.com

Unpacking the enclosure – Labconco XVS Ventilation Stations 4865060 User Manual

Page 15

background image

Chapter 3: Getting Started

Product Service 1-800-522-7658

11

Unpacking the Enclosure

Carefully remove the shrink-wrap or carton on the enclosure and inspect it
for damage that may have occurred in transit. If damaged, notify the delivery
carrier immediately and retain the entire shipment intact for inspection by the
carrier.

• Do not return goods without the prior authorization of Labconco.

Unauthorized returns will not be accepted.

• If enclosure was damaged in transit, you must file a claim directly

with the freight carrier. Labconco Corporation and its dealers are not
responsible for shipping damages.

• The United States Interstate Commerce Commission rules require that

claims be filed with the delivery carrier within fifteen (15) days of
delivery.

• Do not discard the packing material until you have checked all of the

components and tested the unit.

• We recommend that you do not remove the enclosure from its

shipping container until it is ready to be placed into its final location.
Move the unit by placing a flat, low dolly under the shipping skid, or
by using a floor jack.

NOTE: DO NOT MOVE THE ENCLOSURE BY TILTING IT ONTO A
HAND TRUCK.

Install the Enclosure on a Supporting Structure
and Work Surface

Note: Use caution when lifting or moving the enclosure.

When installing the enclosure onto a work surface or benchtop, ensure that
the structure can safely support the combined weight of the enclosure and any
related equipment. The work surface should be at least as wide as the
enclosure to properly support it. The front of the enclosure should be aligned
within 1/8" of the front of the work surface. Mounting holes are provided in
the Labconco accessory work surfaces to secure the enclosure.

This manual is related to the following products: