Dolby Laboratories Digital-Satellite-Receiver - Manual (Page 63)

Serial interface RS 232:
Type
RS 232, bidirectional
Bitrate 115,2 kBit/s max.
Connector D-SUB socket, 9 pin
Function Update for operating software and
pre-programming
LNC Power supply:
LNC power
400 mA max.; short-circuit proof
LNB voltage vertical <14,0V no load, > 11,5 V at 400
mA
LNB voltage horizontal < 20 V no load, > 17,3 V at 400
mA
LNC switched off in standby mode
22 kHz modulation:
22 kHz, Amplitude 0.6 V +/- 0.2 V
Programme memory/Satellite positions:
No. of programmes Favourites list TV:
999 TV programmes
No. of programmes Favourites list :
999 radio programmes
Number of programmes:
Complete list TV/Radio:
A total of 4000 programmes
can be accommodated in the
Complete list
DiSEqC:
DiSEqC 1.0 and DiSEqC 1.2
SFI data:
SFI preview:
maximum 7 days in advance
Timer:
Events:
maximum 30 events, one year in
advance
Remote control system:
RC-5
Sub-system address 10 (SAT 2)
Modulation frequency 36 kHz
Infrared wavelength 950 nm
Power Supply:
Mains power unit:
Power requirement:*
21 W/ 20 W/ 19 W
in operation, horizontal
Polarisation / 400 mA LNC Power
requirement
11,5 W/ 10 W/ 9,5 W in operation excl. LNC
6 W/ 5,5 W in standby mode
Mains power voltage:
180 V.... 250 V / 50 Hz alternating current
General:
Dimension (WxDxH):
305 mm x 135 mm x 65 mm
Weight: 0,8 kg
63
* Depends of the receiver type
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:15 Seite 63