Dolby Laboratories Digital-Satellite-Receiver - Manual (Page 13)

4.5 Hi-fi amplifier
4.5.1 Analogue
To enjoy the best possible sound quality, you can connect the
digital receiver to a hi-fi amplifier. Use a suitable cable to con-
nect the cinch sockets
Audio R and Audio L of the digital
receiver to an input of the hi-fi amplifier (e.g. CD or AUX; ple-
ase note that the Phono input is not suitable!).
4.5.2 Digital
If your amplifier is equipped with an appropriate electrical or
optical input socket, connect the socket
AUDIO OUT
DIGITAL electrical resp. AUDIO OUT DIGITAL opti-
cal* with the electrical resp. optical input of your amplifier.
Sampling rates of 32, 44.1 and 48 KHz are provided, depen-
ding on the broadcasting station.
In addition, this connection will reproduce the Dolby Digital
signal (AC3), where available.
4.6 Serial interface (RS 232)
The RS 232 interface is used to update the operating system,
and to facilitate pre-programming by means of a personal
computer.
5 Getting started: initial installation
When you have read the safety notes, and have connected
the unit as described in Chapter 4, you can proceed to switch
on the receiver as described in Chapter 7. When switching
on the unit for the first time, the Start window with the
AutoInstall installation assistant
(Fig. 5-1) will be display-
ed. The installation assistant will guide you through the most
important settings of the digital receiver quickly and in an
easy-to-follow manner.
The keys on the remote control required to make the appro-
priate step in the installation are marked.
You can break off the initial installation procedure at any time
by pressing the
red function key. Pressing the green func-
tion key takes you back to the previous step of the installation
procedure. This allows you to correct any entries made in
error.
If the initial installation is not carried out at all, or is interrup-
ted, your unit will start operation with its standard pre-pro-
grammed settings.
13
* Only for receivers equipped with
this feature
(Fig. 5-1)
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:14 Seite 13