Dolby Laboratories Digital-Satellite-Receiver - Manual (Page 31)

7.12 Teletext
7.12.1 Using the teletext decoder of your television
set
Where broadcast by the provider, teletext will be transferred
to your television set. To operate the teletext function, use the
remote control of your television set. Should you experience
problems with your television set, such as an overlap of tele-
text and picture content, you should set your digital receiver
to
CVBS mode (Point 6.3.4).
7.12.2 Using the internal teletext decoder
As an alternative, you can utilize the integrated TOP teletext
decoder to display information. The TOP teletext system
groups together all text pages in groups and blocks according
to subject matter, which makes the system more managea-
ble.
>
Select the programme on which you wish to view tele-
text information.
> Press the
teletext key to switch on the teletext (Fig.
7-15) .
> Use the
numeric keys to enter the teletext page
you wish to view. Your entry will be displayed in the
upper left corner of the screen. When you have enter-
ed the desired teletext page, your receiver will search
for this page.
Since not all teletext pages can be transmitted simul-
taneously, it may take a few seconds for your unit to
find the page and display it on your television screen.
All teletext providers utilize page 100 for their index.
> Use the
red resp. green keys to move forward or
back one page at a time.
> Press the
yellow function key to call up the teletext
group indicated in the yellow field.
> Press the
blue function key to call up the teletext
block indicated in the blue field.
Mixed mode
>
Pressing the key
teletext again will switch the
screen display to mixed mode (simultaneous display
of the
teletext information as well as of the TV pictu-
re). Press this key again to exit from mixed mode.
Stop mode
>
Press the
Stop key; the message Stop will be
displayed in the top left corner of the teletext window.
This will prevent the automatic continuous paging of
the teletext sub-pages. Press the
Stop key again to
exit the Stop mode.
> Press
Back to return to normal operation.
31
(Fig. 7-15)
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:14 Seite 31