Dolby Laboratories Digital-Satellite-Receiver User Manual

Page 38

Use the

arrow keys up/down to move the marker

around the list one line at a time.

Use the

arrow keys right/left to move the marker

backward or forward in the list one page at a time.

Date
>

Use the

arrow keys to mark the column Date.

Use the

numeric keys to enter the date on which

you wish to record a programme.

Start
>

Use the

arrow key right to mark the column Start.

In this line, use the

numeric keys to enter the star-

ting time for the timer.

Stop
>

Repeat the steps as described under “Start” to enter
the stopping time.

So that all timer events can be accommodated, there
should be an interval of at least one minute between the
stopping time of one timer event and the starting time of
the next timer event! Should there be an overlap between
two timer events, these will be highlighted in red.
Repeat (optional)
>

Use the

arrow keys to mark the column Rep.

Press

OK.

A selection window will be displayed, offering various
suggested repeating intervals.
1x

Timer used once only

Daily repeat

1 W Repeat once weekly

1-5

Repeat only on weekdays

6-7

Repeat only on weekends

Use the

arrow keys up/down to select the desired

function.

Press

OK to accept the setting into memory.

Type
>

Use the

arrow keys to mark the column Type.

In this line, press

OK to enter the desired status.

1. VCR
Your digital receiver will be switched on and off for the
programme selected.
If the receiver was switched on by the timer, this will
be indicated by “

rEc” on the display*. Most of the

functions of the remote control will be de-activated to
prevent an accidental interruption of the recording.
In standby operation the active timer will be indicated
by a blinking colon in the time display.

* Only for receivers equipped with

this feature

bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:14 Seite 38