Dolby Laboratories Digital-Satellite-Receiver - Manual (Page 15)

Position A/Option A
>
Use the
Up/down arrow keys to select the satelli-
te you wish to receive at the DiSEqC setting Position
A/Option A, and confirm by pressing OK.
(Fig. 5-7)
Position B/Option A
>
Use the
Up/down arrow keys to select the satelli-
te you wish to receive at the DiSEqC setting Position
B/Option A, and confirm by pressing OK.
(Fig. 5-8)
Position A/Option B
>
Use the
Up/down arrow keys to select the satelli-
te you wish to receive at the DiSEqC setting Position
A/Option B, and confirm by pressing OK.
(Fig. 5-9)
Position B/Option B
>
Use the
Up/down arrow keys to select the satelli-
te you wish to receive at the DiSEqC setting Position
B/Option B, and confirm by pressing OK.
(Fig. 5-10)
With the next step you can check again on the configuration
of your antenna.
>
If you wish to confirm this setting, use the
arrow
keys up/down to select the field yes, and confirm
by pressing
OK.
(Fig. 5-11)
Updating the software (Pre-condition: Astra 19,2° recep-
tion)
When you have completed the settings for the antenna confi-
guration, the digital receiver will check on whether there is an
updated version of the software for your unit available via
satellite. If a new version of the software is available, you can
process a software update automatically. Use the
arrow
keys right /left to select the field Update, then confirm
by pressing
OK. (Fig. 5-12). The new software for your unit
will now be downloaded. This procedure can take several
minutes.
Searching/scanning for channels/stations
When the software version has been checked, and updated if
necessary, you can proceed to the programme search.
>
Use the
arrow keys up/down to mark the field All
Programmes, if you want to search for both free-to-
air and encrypted programmes, or
All unencrypted
Programmes, if you want to search only for free-to-
air programmes.
(Fig. 5-13)
> Press the
OK key now to confirm, and an automatic
programme scan will be carried out. All the satellites
selected in the antenna configuration step will be
scanned for programmes. This procedure may take
several minutes. Please note any messages displayed
15
(Fig. 5-7)
(Fig. 5-8)
(Fig. 5-9)
(Fig. 5-10)
(Fig. 5-11)
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:14 Seite 15