Dolby Laboratories Digital-Satellite-Receiver - Manual (Page 44)

You can now initiate the updating procedure manually:
>
Use the
On/Standby key to switch off the receiver
(Standby).
> Now, while the display* shows “oooo”, press the key
SFI.
The receiver will now perform an update. This will be
indicated by the message
SFLd appearing briefly in
the display*, followed by a progressive indication of
the percentage of SFI data already downloaded.
> The updating procedure may be interrupted by swit-
ching on the digital receiver(Key
On/ Standby).
8.1.6 Blocking programmes (Parental control)
You have the facility to block access to programmes. A blok-
ked programme can only be viewed on the screen if you first
select the programme, and then enter your personal receiver
PIN code or the Smartcard PIN code. Before selecting the
programmes you wish to block, you must activate the paren-
tal control function as described in Point 6.2.1.
To block access to a programme, call up the Navigator as
described in Point 8.1.1. This will take you to the Favourites
list.
>
Press the
blue function key Functions.
A selection window will be displayed indicating the
available Navigator functions.
> Use the
arrow keys up/down to mark the line
Parental control.
> Confirm by pressing
OK.
> Now use the
arrow keys up/down to mark the pro-
gramme you wish to block.
> Block access to the programme by pressing the
yel-
low function key. The parental control symbol
will
be displayed next to the programme selected.
> To block access to several programmes simultaneous-
ly, mark these as described in 8.1.2 ( Marking blocks
of programmes) and block them by pressing the
yel-
low function key.
> When you have completed configuring the programme
list according to your personal preference in this man-
ner, press the
Menu key to return to normal opera-
tion.
> To remove the block on individual programmes, pro-
ceed as described above. Mark the desired program-
me and remove the parental control symbol by pres-
sing the
yellow function key.
Note! You cannot unblock pre-blocked program-
mes that are not coded for viewing by children,
and are pre-blocked by the provider!
44
* Only for receivers equipped with
this feature
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:14 Seite 44