Heath Consultants Gas Delivery Unit (GDUnet) - Manual (Page 102)

6-8
USER HANDBOOK
On completion of gas entries, a setup template name can now
be added.
14. To name ‘gas setup’, position cursor in window then type
name of setup template, as illustrated in example Fig 6-10.
Fig. 6-10
15. To save template, select ‘Save Setup’ button to store
new ‘Gsv 526’ setup.
Note: There is an ‘Advanced Editor’ feature available, as
detailed in Chapter 3, section 3.4. This feature should
not normally be accessed as gases, gas ranges and
corresponding limits are factory set and should not
require adjustment. GMI cannot be held responsible
if these values are edited.