Hanna Instruments HI 93710 - Manual (Page 25)

25
HI 93701-T Reagents for 300 total chlorine tests (liquid version)
HI 93719-01 Reagents for 100 hardness tests
HI 93719-03 Reagents for 300 hardness tests
HI 93746-01 Reagents for iron LR (100 packets)
HI 93746-03 Reagents for iron LR (300 packets)
For other accessories see page 48.
MEASUREMENT PROCEDURES
• Turn the meter on by pressing ON/OFF.
• When the LCD displays "- - - -" keep SET pressed until the desired
parameter is displayed.
• Release the key and when the LCD displays "- - -", it is ready.
• Refer to the manual pages below to measure
the appropriate parameter and for the re-
quired reagents:
FREE CHLORINE MEASUREMENT
• "Cl F" will appear on the LCD; then see
page 34.
TOTAL CHLORINE MEASUREMENT
• "Cl t" will appear on the LCD; then see page 36.
pH MEASUREMENT
• "PH" will appear on the LCD; then see page 46.
LOW RANGE IRON MEASUREMENT
• "FE" will appear on the LCD; then see page 48.
HARDNESS MEASUREMENT
• "Hrd" will appear on the LCD; then see page 39.
HI 93745
Chlorine/pH/Iron LR/Hardness
ON
OFF
SET