Hanna Instruments HI 943500A - Manual (Page 25)

All HANNA instruments ® meters are warranted for two years against
defects in workmanship and materials when used for their intended
purpose and maintained according to instructions.
The probes are warranted for a period of six months.
This warranty is limited to repair or replacement free of charge.
Damages due to accident, misuse, tampering or lack of prescribed
maintenance are not covered.
If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of
purchase, serial number and the nature of the failure. If the repair is not
covered by the warranty, you will be notified of the charges incurred.
If the instrument is to be returned to HANNA instruments ® , first obtain
a Returned Goods Authorization Number from the Customer Service
department and then send it with shipment costs prepaid.
When shipping any instrument, make sure it is properly packaged for
complete protection.
All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.
WARRANTY
CONDUCTIVITY PROBES
HI 7635 In-line conductivity probe with 3 m (10') cable
(for HI 8936 only)
HI 7638 Conductivity probe for tank installation, with 3 m
(10') cable (for HI 8936 or HI 943500)
73mm
2.87"
52mm
2.04"
1" NPT
142mm
5.60"
Hanna Instruments reserves the right to modify the design,
construction and appearance of its products without
advance notice.