Hanna Instruments HI 98150N - Manual (Page 3)

3
P R E L I M I N A R Y E X A M I N A T I O N P R E L I M I N A R Y E X A M I N A T I O N P R E L I M I N A R Y E X A M I N A T I O N P R E L I M I N A R Y E X A M I N A T I O N P R E L I M I N A R Y E X A M I N A T I O N
HI 98140, HI 98150 and HI 98160 are state-of-the-art, hand held pH
meters, designed to provide laboratory results and accuracy under harsh
industrial conditions.
These instruments are provided with a series of new diagnostic features
which add an entirely new dimension to the measurement of pH, by
allowing the user to dramatically improve the reliability of the measurement:
• 7 automatically recognized pH buffers (pH 1.68, 4.01, 6.86, 7.01,
9.18, 10.01 and 12.45) for calibration
• pH calibration up to three ( HI 98140) and five (HI 98150 &
HI 98160) calibration points
• Custom calibration by entering up to two custom buffers
• Messages on the LCD to guide the user through instrument operation
• Diagnostic features to alert the user when the electrode needs cleaning
• Outside Calibration Range warning
• Monitoring of the electrode’s aging
• User-selectable “calibration time out” to remind the user when a
new calibration is necessary.
HI 98140 and HI 98150 works with SMART amplified electrodes. These
electrodes incorporate a chip, which stores the calibration data performed
with a specific instrument.
G E N E R A L D E S C R I P T I O N G E N E R A L D E S C R I P T I O N G E N E R A L D E S C R I P T I O N G E N E R A L D E S C R I P T I O N G E N E R A L D E S C R I P T I O N
Remove the instrument from the packing material and examine it carefully
to make sure that no damage has occurred during shipping. If there is any
damage, notify your Dealer or the nearest Hanna Customer Service Center.
Each instrument is supplied with:
• HI 1230B Non refillable Combination double-junction, pH Electrode
with gelled electrolyte (
HI 98160)
• HI 1618D Amplified pH electrode with built-in temperature sensor
and EEPROM and DIN connector. (
HI 98140 & HI 98150)
• HI 7662 stainless steel Temperature Probe with 1 m (3.3') Cable
(
HI 98160)
• pH 4.01 & 7.01 Buffer Solutions (20 mL each)
• HI 70000 electrode cleaning solution
• 3 x 1.5V AAA Batteries
• Instruction Manual
• Rugged Carrying Case
Note: Save all packing material until you are sure that the instrument
functions correctly. All defective items must be returned in the
original packing with the supplied accessories.