Hanna Instruments HI 98150N - Manual (Page 25)

25
• Press the ARROW keys to change the record number.
• Press CAL or Range or CLR to escape from DEL screen and enter view
record items mode.
Note: Pressing 2nd then Setup the instrument toggles between record
number and all records.
• Press 2nd then CFM or CFM to confirm delete. The “nuLL” message
will be displayed on the primary LCD for the selected record. While
“
nuLL” message is displayed the 2nd, CAL, Range and CLR keys
are inactive. Press the ARROW keys to select an undeleted record.
• If “ dEL ALL” option was selected, all logged data are deleted and
the instrument returns to measurement mode
Press 2nd then RCL at any time to return to measurement mode.
The “ ” and “ WAIT” tags blinks during memory is reorganized.
A AA AA u t o E n d u t o E n d u t o E n d u t o E n d u t o E n d
To freeze the first stable reading on the LCD
press
AutoEnd while the instrument is in
measurement mode.
The ” HOLD” tag will be displayed blinking on
the LCD until the reading will stabilize.
When the reading is stable, the “ HOLD” tag
stops blinking and the reading is frozen on the
LCD.
Press AutoEnd again to return to normal measurement mode.
Note: • Pressing Range (HI 98150 & HI 98160 only) the instrument
will display alternate measurement range, without leaving
AutoEnd mode. The
Log key also holds AutoEnd mode.
• Pressing 2nd then Setup, GLP or RCL, the instrument
leaves AutoEnd mode and performs the selected function.