Hanna Instruments HI 98150N - Manual (Page 24)

24
VIEW LOGGED DATA
Press 2nd then RCL to retrieve the information
stored while in measurement mode for the
specific range. “
RECALL MEMORY” will be
displayed on LCD.
If no records were logged, the instrument will
display “
no rEC” message blinking.
Otherwise, the instrument will display the
logged data, in according with the selected
range:
• If RCL mode was entered while the instrument
was in pH range: the last pH memorized
reading appears on the primary LCD and
the record number on the secondary LCD.
• If RCL mode was entered while the instrument
was in mV or Rel mV range: the last Rel
mV memorized reading appears on the
primary LCD and the record number on
the secondary LCD.
Press Range (HI 98150 & HI 98160) or 2nd then Mode (HI 98140)
and the instrument will display the next logged parameter as shown
in the table below:
DATE/TIME Month & day Hour & minutes
Parameter Primary LCD Secondary LCD
SLOPE Slope value in % Offset value in mV
mV mV reading Temperature
Note: If in Rel mV RECALL mode regarding the slope, the instrument will
display “ ----” message on the primary LCD.
Press 2nd and CLR or simply CLR to delete records.
The “ dEL” message is displayed on the primary LCD, the record number on
the secondary LCD and “ CFM” tags will blink.