Hanna Instruments HI 98170 User Manual
Page 36

3 6
LODIALL Requests all ISE Log on demand (HI 98172).
The answer string for each record contains:
• The logged mode (2 chars):
• 01 - pH range (0.01 resolution)
• 02 - pH range (0.1 resolution)
• 03 - mV range
• 04 - Rel mV range
• 05 - ISE range
• Reading status (1 char): R, O, U
• Calculated reading, with sign and decimal point (7 chars) -
for pH, Rel mV and ISE range
• Temperature reading, with sign and two decimal points
(7 chars)
• mV reading status (1 char): R, O, U - only for HI 98171
and HI 98172
• The mV reading, with sign and decimal point (7 chars) -
only for HI 98171 and HI 98172
• The logged time, yymmddhhmmss (12 chars)
• The calibration slope, with sign and decimal point (7 chars)
- not available for Rel mV range
• The calibration offset, with sign and decimal point (7 chars) -
not available for ISE
• Temperature probe presence (1 char)
Notes: • “Err8” is sent if the instrument is not in measurement mode.
• “Err6” is sent if the requested range is not available.
• “Err4” is sent if the requested set parameter is not available.
• “Err3” is sent if the Log on demand is empty.
• “Err9” is sent if the battery power is less than 30%.
• Invalid commands will be ignored.