Hanna Instruments HI 98170 - Manual (Page 28)

2 8
• If RCL mode was invoked while the instrument
was in ISE range: the last ppm memorized
reading on the primary LCD and the record
number on the secondary LCD.
Press 2nd then SETUP while in RECALL mode and the instrument will toggle
between the record number on the secondary LCD and the current displayed
information. Use the ARROW keys to select another record.
Press 2nd then MODE and the instrument will display the next logged
parameter as shown in the table below:
Note: If in Rel mV RECALL mode regarding the slope, the instrument will
display “----” message on the primary LCD.
Last displayed parameter is “dEL” message on the
primary LCD and the record number on the secondary
LCD.
Note: Pressing 2nd then SETUP the instrument toggles between record
number and all records.
• Press 2nd then CLR to delete the selected or all records. The “nuLL”
message will be displayed on the primary LCD for the selected record.
• If “dEL ALL” option was selected, all logged data are deleted and the
instrument returns to measurement mode.
Press 2nd then RCL at any time to return to measurement mode.
OFFSET Offset value OFFS
DATE Month & day Year
TIME Hour & minutes Seconds
Parameter Primary LCD Secondary LCD
SLOPE Slope value SLP
mV mV reading Temperature