Hanna Instruments HI 98170 - Manual (Page 29)

2 9
A u t o E nd
To freeze the first stable reading on the LCD press
AutoEnd while the instrument is in measurement
mode.
The ”HOLD” tag will be displayed blinking on the
LCD until the reading will stabilize.
When the reading is stable, the “HOLD” tag stops blinking and the reading
is frozen on the LCD.
Press AutoEnd again to return to normal measurement mode.
Note: Pressing 2nd then MODE the instrument will skip to the displayed range,
without leaving AutoEnd mode. The LOG key also holds AutoEnd mode.
Pressing2nd then SETUP, GLP or RCL, the instrument leaves AutoEnd
mode and performs the selected function.
AutoEnd CLR