Hall Research VSM-I-A-4-JA4 - Manual (Page 20)

User’s Manual
18
Outputs Column
Displays output names. Output names (labels) are read-only on this page, however;
names can be changed from Labels tab.
Inputs Column
Four dropdown buttons allow user to select Video Input to tie to respective Output. It
also shows current ties status and updates in real time.
Sync A/V
Sync A/V checkboxes are there to save you time, so if you want to route audio and
video from the same input, if this box is checked, then regardless of which tab you are
under (Video or Audio), whatever ties you make is automatically done on the other one.
When unchecked, audio and video inputs can be routed individually.
Recall
First select preset you want to load from dropdown menu and then click Recall button
to load existing preset from memory.
Save
After selecting a preset name from dropdown menu, click Save state as a Preset
ON/OFF
These buttons show the current status of Matrix’s power and can be used to turn it on
and off. The button with red boarder is the current state and cannot be clicked. The
other one is available.
5.2.1 Audio Routing Tab
Audio routing tab functions in a similar manner
as Video tab explained above
5.2.2 Labels Tab
User can assign names of their choice to Inputs,
Outputs and Presets in this tab.
Label names are limited to sixteen characters
long including white spaces.
Apply
Click this button to save your changes after
changing names.
Figure 13 - Labels Tab
Note: If the front panel is used to make ties, this checkbox can
automatically disappear. If the box is checked, then the output
routing under the complimentary tab (Video or Audio) is the
same. But if the box is not checked then you can’t be sure and will
have check under the other tab .