Hall Research VSM-I-A-4-JA4 - Manual (Page 18)

User’s Manual
16
Figure 10- Device Installer
5.2 Controlling the Matrix via Web Interface
The Genesis Matrices with IP option have
a powerful, yet easy to use IP based web
interface to control and monitor matrix.
Web browser application running on any
device (Computer, Smartphone, iPad™)
on the same network can use this
interface.
Once you have the correct IP address of
your device, open web browser of your
choice and type
http://your.device.ip.address in the
address bar and hit Enter.
The web server will automatically format
the display for the browser it is running on. This means that on a Smart Phone the
width and character sizes will be optimized so you don’t have to deal with zooming and
scrolling the screen to use the unit.
Furthermore, all elements on the screen are automatically updated from server side.
This means that if the video routing is altered by the front panel of the matrix or another
simultaneous LAN connection, your screen will automatically update.
Web interface allows the user to change/monitor matrix I/O ties, sync audio/video
together, assign names to Inputs, outputs and presets as well as change IP address,
assign static IP address, enable/disable password protected login etc…
Preset, Input and Output names are saved permanently in matrix unless user changes
it. Matrix also remembers Presets even when not powered.
The web interface is very user friendly and easy to access. It consists of four tabs
named Video, Audio, Labels and Settings. Video and Audio are tabs for routing video
and audio separately. Each tab and its features are explained in next sections.
Device IP Address
Notice Don’t try to change the IP address using this utility! The IP address
can be changed from Web interface (section 5.2) or from Serial
interface (section 5.3 IP specific Serial Commands)
Figure 11 – Control via web Interface