Hall Research HSM-I-04-04 - Manual (Page 8)

User’s Manual
6
 Using quality HDMI cables connect the inputs to video sources.
 If the sources are DVI (PC) then you will need either a DVI to HDMI adapter,
or preferably, a DVI to HDMI Cable
Figure 3 –
Model C-HDMI-DVI-xM
(x = 2, 3 or 5 meters)
 For a professional installation, we recommend using locking HDMI cables.
The Matrix Switch has a tapped hole above each HDMI connector and the
locking cables available from Hall Research come with screws and stand-
offs for securing the cables in place so they don’t accidentally get unplugged
Figure 4 –
Model C-HDMI-L-x
(x = 1.5, 3, 6, 10, 15, 25, 35 or 50 ft)
 Next, connect the HDMI outputs to the displays.
 Plug the power supply to the unit. Use only the supply that came with the
unit
 There is an IR remote detector (eye) on the front panel of the unit, however,
if the unit is to be situated in a closet or enclosure, it may be necessary to
use an IR detector cable and locate the “eye” somewhere more convenient.
Hall Research can provide such a cable that will plug into a jack on the rear
of the HSM matrix
Figure 5 -
Model CIR-DET-D1