Hall Research HSM-I-04-04 - Manual (Page 19)

Genesis Digital™ HDMI Matrix Switches
17
5.2.1 Video Routing Tab
The routing tab allows the user to control the matrix I/O ties, save the current
configuration as a preset, load existing presets and turn the matrix on or off.
Please refer to Figure 13 for a typical example screen of the routing tab, as it would
appear on a Smart-Phone.
Outputs Column
Displays the name for the selected matrix output. You cannot change the output
names (labels) here. Labels can be changed using the Labels tab
Inputs Column
Two (for a 4x2 matrix) or four (for a 4x4 matrix) dropdown buttons allow the user to
select the desired matrix input to tie to the respective matrix output. The also shows
the current tie status and is updated in real time.
Recall Preset
Previously saved ties may be saved in the matrix and can be recalled for quick
changes to the matrix. First, select the desired preset you want to load from the
dropdown menu and then click the Recall Preset button to load an existing
configuration from memory.
Save Preset
Select the preset name from the dropdown menu and Click Save Preset to save
current tie pattern as a preset with that name.
ON/OFF
These buttons show the status of matrices power and can be used to turn it on and off.
The button with red border is the current state and cannot be clicked. For example in
figure 13 above, the matrix is ON and you can turn it off by clicking the OFF button.
Figure 13- Video Routing Tab