Hall Research HSM-I-04-04 - Manual (Page 26)

User’s Manual
24
Appendix 1 – Front Panel Quick Reference Guide
Figure 17 – Control buttons on the front panel
Function Procedure
View ties or Make ties  Hit any of the INPUT or OUTPUT Buttons
 To change ties, hit any INPUT or OUTPUT then hit SET
Recall Presets  Hit PRE (button lights up)
 Hit any INPUT or OUTPUT button
Save Presets  Hold PRE until it starts blinking
 Hit any INPUT or OUTPUT button
Power ON/OFF  To turn on hit power button
 To turn off Press and hold power button
Appendix 2 – Command Summary
Command Function
PWx Power on/off x=0 power off, 1 power on
Omitting x will show current power status
COn,m Connect Output n = output, m= input
 Omitting ,m will show current connections
PRx Preset Recall... x = preset # can be 1 to 8
PSx Preset Save ... x = preset # can be 1 to 8
HDn Read Input Status, n = Input #
Returns: 0 No Video
1 Vid
EDn EDID Management
0: DVI Emulated EDID
1 C t d HDTV (D f lt)
FB Firmware Boot (Resets the entire system)
ST Status Report
FD Factory Reset for IP enabled matrices
FR Factory Reset for Non-IP enabled matrices