Hall Research HSM-I-04-04 - Manual (Page 21)

Genesis Digital™ HDMI Matrix Switches
19
Factory Default Settings for IP interface
Field Value GUI Tab
Power Off Routing
INPUT1 HDMI_In_1 Labels
INPUT2 HDMI_In_2 Labels
INPUT3 HDMI_In_3 Labels
INPUT4 HDMI_In_4 Labels
OUTPUT1 HDMI_Out_1 Labels
OUTPUT2 HDMI_Out_2 Labels
OUTPUT3 HDMI_Out_3 Labels
OUTPUT4 HDMI_Out_4 Labels
PRESET1 PRESET_1 Labels
PRESET2 PRESET_2 Labels
PRESET3 PRESET_3 Labels
PERSET4 PRESET_4 Labels
PRESET5 PRESET_5 Labels
PRESET6 PRESET_6 Labels
PRESET7 PRESET_7 Labels
PRESET8 PRESET_8 Labels
Name HSM Matrix Settings
Location Hall Research Settings
IP Assigned by
DHCP
Settings
Subnet Based on IP Settings
Gateway Assigned by
DHCP
Settings
DHCP Enabled Settings
Login Disabled Settings
Telnet Enabled Settings
Default
P d
pass Settings
DHCP
Enables/ Disables DHCP. If enabled, the matrix is assigned an IP address from the
user’s compatible networks DHCP router. This is the factory default. If disabled, the
matrix is assigned the IP address, subnet mask and gateway address supplied by the
user.
Login
Enables/Disables the system login password. If enabled, the matrix will require a
password in order to operate the controls. If disabled, the matrix requires no password
to operate the controls. This is the factory default.
Telnet
Enables/Disables the telnet interface. See Section 6 for more details
Change Password?
Allow the user to change the existing system password. When clicked, a window will
open for entering the new password. The password length is limited to eight (8)
characters long.
Apply
The User must click this button
after changing any field on
settings tab to save the changes.
Factory Reset
This button restores the factory
defaults to this matrix. Factory
default will also wipe out saved
presets.