Hall Research UHBX-SW3-WP - Manual (Page 3)

1
© Copyright 2015. Hall Research, Inc.
All rights reserved.
UHBX-SW3-WP
1. Windows™ Software Installation
1.1. General
The UHBX-SW3-WP graphical user interface (GUI) is a Windows ® software used to
configure advanced settings of the UHBX-SW3-WP. Use of the software requires USB
connection of the PC to the device. For convenience, a USB cable is provided with the
wall plate.
After configuring the wall plate, the user can save the desired configuration as a file on
their PC. Configuration files can also be uploaded to wall plate.
1.2. Installation Prerequisites
• PC with Windows XP™ OS or later
• USB port
• Microsoft™ .NET Framework 2.0 or later (most recent OS including Windows 7 and
8 typically include this and no action is required). If .NET Framework 2.0 or later is
not installed on your PC, the Microsoft™ website has free downloads available.
1.3. Installing the Software
• If an earlier version of this software was previously installed, UNINSTALL the
program first from either the Add/Remove Programs section of the control panel or
by running the previous installation SETUP.EXE and selecting “remove application”.
• Install the software by executing the SETUP.EXE program from the installation
source directory
• Accept the default settings, but if you want to specify a particular installation
directory other than the default, you may do so.
• Once the UHBX-SW3-WP software installation has completed, either click the
desktop icon
or from the Start Menu:
Start  Programs  Hall Research  UHBX-SW3-WP