FeiYu Tech FY-41AP - Manual (Page 15)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
Page 15
！
Gyroscope Reset
If the following conditions occur, the FY-41AP initialization is recommended:
(1)
The device has not been used for a long time.
(2)
There is a change in environmental temperature of over 30 degrees since last flight.
(3)
The purple LED flashes continuously even when the FY-41AP remains stationary and
you never activate the motor.(When you in non navigation mode, which means SW2 is
―NULL‖.
Note:
For the better flight, we suggest you to do the gyro reset before each flight.
There are three way to realize the gyro reset. (The FY-41AP must keep stationary during
the gyro reset procedure)
 Through SW1:
On SW1,switch ABM to Deactivated Mode 6 times, time interval has to be less than 3
seconds as follows:
ABM→ Deactivated Mode → ABM → Deactivated Mode → ABM → Deactivated Mode
→ ABM → Deactivated Mode → ABM → Deactivated Mode → ABM → Deactivated
Mode.
 Through OSD video overlay menu ―INIT GYRO‖ option.
 Through FY-41AP setting software ―Init GYRO‖ button.