FeiYu Tech FY-41AP - Manual (Page 14)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
Page 14
Remote control setting: SW1&SW2
 FY-41AP needs remote control and receiver with at least 6 channels, including 4
normal channels for AIL,ELE,THR,RUD, and two for SW1,SW2 to control flying
mode.
 You need to choose normal fixed wing plane mode canceling all mix control modes,
meanwhile setting CH5,CH6 to two three-switch.
 FY-41AP need two three-switch to control flying mode:SW1 for deactivated mode,
stable mode, 3D mode; SW2 for return to home and path flight (default
mode),circle, and fixed attitude and head locking mode(need set)
 After setting the Switch, you can double check by monitoring the indicator light on
the module against selected flying mode. Detail see the indicator light manual
 SW1&SW2 default set：
SW1 SW2
deactivated Path flight
stable NULL
3D Path flight
NOTE: SW-2 has priority over SW-1. Only when SW-2 is in the ‗Null‘ Mode can
SW-1 work. Therefore ‗Null‘ should be one of the options for SW-2, otherwise SW-1
will not work.