Eurocom B7110 FOX - Manual (Page 141)

Modules & Options
3.75G/HSPA Module 7 - 23
7
Before installing the application, make sure that the 3.75G/HSPA module is ON
(installing the driver with the module off will not allow the software to detect the
module hardware correctly). Use the Fn +
key combination (see Table 1 - 5, on
page 1 - 12 ) to toggle power to the 3.75G/HSPA module. When the 3.75G/HSPA
module is powered on, the indicator will briefly be displayed. Make sure you in-
stall the drivers in the order indicated in Table 4 - 1, on page 4 - 3 . Note that exiting
the application does NOT turn off the 3.75G/HSPA module.
• Mobile Partner - See “Mobile Partner Application Installation” on page 7 -
24 for driver installation information and “Mobile Partner Application” on
page 7 - 25 for instructions on using the Mobile Partner application.