Eurocom Uno 3 - Manual (Page 35)

Quick Start Guide
On Screen Display Indicators/Buttons 1 - 9
1
On Screen Display Indicators/Buttons
Press the function menu button for about two seconds (see Table 1 - 1, on page 1 - 8 ) to bring up the On
Screen Display. The OSD provides visual indicators for brightness, volume, camera power toggle and WLAN/
Bluetooth power toggle (the camera, WLAN and Bluetooth power indicators will only display if the modules are
included in your purchase configuration) when the Hotkey AP is installed (see page
4 - 6 ).
Table 1 - 3 - On Screen Display Indicators
The indicators will appear when the computer boots up, or resumes from a power saving state, in order to display
the current power status of the camera and/or WLAN/Bluetooth module. If you adjust the brightness or volume
the OSD indicators will appear, and will also allow you to adjust the power status of the camera and/or WLAN/
Bluetooth module using the mouse to click on the icon.
OSD Icon Description OSD Icon Description
Volume Decrease/Increase Camera Power Toggle
Brightness Decrease/Increase Bluetooth Power Toggle
WLAN Power Toggle