Eurocom Uno 3 - Manual (Page 103)

Upgrading The Computer
Removing the Battery 6 - 3
6
Removing the Battery
If you are confident in undertaking upgrade procedures yourself, for safety reasons
it is best to remove the battery. Before removing the battery disconnect the AC/
DC adapter from the computer first.
1. Turn the computer off, remove the AC/DC adapter and turn it over.
2. Slide the latch in the direction of the arrow.
3. Slide the latch in the direction of the arrow, and hold it in place.
4. Slide the cover in the direction of the arrow until the bottom marker of the battery
cover icon
is aligned with the marker on the side of the computer .
5. Remove the battery bay cover .

Warranty Warning
Please check with your
service representative
before undertaking any
upgrade procedures to
find out if this will VOID
your warranty.
Figure 6 - 1
Battery Bay Cover
Removal
1
2
3 4
5
2 1
5
3
3
4