The setup program, Entering setup, The setup program -4 – Eurocom L390T Uno User Manual
Page 64: Entering setup -4
BIOS Utilities
5 - 4 The Setup Program
5
The Setup Program
The Setup Utility program tells the system how to configure itself and manage basic
features and subsystems (e.g. port configuration).
Entering Setup
To enter the Setup Utility, turn on the computer and press F2 during the POST. The
prompt (Press F2 to Enter Setup) seen on page
is usually present for a few sec-
onds after you turn on the system. If you get a “Keyboard Error”, (usually because
you pressed F2 too quickly) just press F2 again.
If the computer is already on, reboot using the Ctrl + Alt + Delete combination and
then hold down F2 when prompted. The Setup Utility main menu will appear.